Cart is empty

Upcoming international events

January 6-9 2015, PMA@CES, Las Vegas, NV, USA

LumiQuest | Products

POCKET BOUNCER

The POCKET BOUNCER redirects the light at a 90º angle from the flash to soften the quality of light and distribute it over a wider area. While no exposure compensation is necessary with automatic flashes, operating distances are somewhat reduced.

Application: To soften flash light quality with minimal light loss; to be used with slaves or alone where low ceilings are not available or where more direct but soft fill light is desired.

Approximate Light Loss: 1 1/3 stops

Dimensions: Folds flat to 4 1/2” x 7 1/4”

Order code: LQ-101
Price: € 33,00

Put in shopping cart

ULTRA-SOFT

The ULTRA-SOFT redirects the light at a 90º angle from the flash and then further softens the light by passing it through a frosted diffuser.

Application: To achieve a softer look with minimal shadows. For use on an individual flash or to softly illuminate the background in a multiple flash setup. Ideal for close-ups and portraits.

Approximate Light Loss: 2 1/3 stops

Dimensions: Folds flat to 4 1/2” x 7 1/4”

Order code: LQ-103
Price: € 38,00

Put in shopping cart

BIG BOUNCE

The BIG BOUNCE redirects and softens the light in the same manner as the Ultrasoft, with even softer results.

Application: For use where a softer lighting effect is more important than “pocket size” portability (i.e., close-ups, portraits, etc.). Fits the same wide range of flashes as other LumiQuest models.

Approximate Light Loss: 3 stops
Dimensions: Folds flat to 8 1/2” x 10 3/4”

Order code: LQ-104
Price: € 53,00

Put in shopping cart

80-20 / 90-10

The 80-20 redirects 20% of the light at a 90º angle from the flash and allows 80% of the light to pass on, to be redirected by another surface…most likely a ceiling.

Application: This device illuminates the scene with light bouncing off the ceiling while providing “fill” light off the bounce device itself. For use in situations in which an 8-9 ft. neutral colored ceiling is available.

Light Loss: Variable depending on ceiling height

Dimensions: Folds flat to 4 1/2” x 7 1/4”

Order code: LQ-102
Price: € 33,00

Put in shopping cart

*90-10 *

Englisch Englisch Englisch fehlt !!!

Order code: LQ 903
Price: € 33,00

Put in shopping cart

METALLIC INSERTS

The METALLIC INSERTS attach with hook and loop dots to the bounce surface of the Pocket Bouncer, 80-20, Ultrasoft or Big Bounce to further modify the quality of light.

Application: The silver insert adds a specular look to highlights; it is particularly useful for weddings. The gold insert adds a warm tone to the scene; it is particularly useful for outdoor fill flash.

Approximate Light Loss: (Installed on Pocket Bouncer, 80-20)

  • Silver: 2⁄3 stop. Gold: 1 stop. (Installed on Ultrasoft)
  • Silver: 1 2⁄3 stops. Gold: 2 stops. (Installed on Big Bounce)
  • Silver: 2 1⁄3 stops. Gold: 2 2⁄3 stops.

Dimensions: 4” x 7”; 8” x 10 1/2” (for Big Bounce)

METALLIC INSERTS for POCKET BOUNCER and ULTRASOFT

Order code: LQ-112
Price: € 27,00

Put in shopping cart

METALLIC INSERTS for BIG BOUNCE

Order code: LQ-113
Price: € 30,00

Put in shopping cart

BARNDOORS

( noch aktuell ??? )

Nicht immer soll das ganze Motiv vom Blitzlicht beleuchtet werden. Mit den beweglichen Klappen der LumiQuest BARNDOORS können Sie den Leuchtwinkel so verändern, wie Sie ihn brauchen. BARNDOORS passen an POCKET BOUNCER, ULTRASOFT, 80-20 und 90-10 und werden mit Klettband direkt an diesen Blitzaufsätzen befestigt. Besonders bei Weitwinkelaufnahmen ist es möglich, das Blitzlicht auf bildwichtige Details zu beschränken und das Umfeld zurückzudrängen.

Abmessung: flach zusammengelegt etwas 11,5 × 21,7 cm

Order code: LQ 892
Price: On request

Put in shopping cart

FX-SET

The FX is a colored gel system that includes an assortment of five colored gels—blue, green, red, yellow and amber. The FX filter holder, designed to fit most flash models, enables the photographer to quickly and conveniently colorize the light for a variety of special effect applications. The system folds flat and comes with a convenient storage pouch.

Application: Colorize the light for a variety of special effects.

Approximate Light Loss: 1 stop

Dimensions: Folds flat to 3 3/8” x 4 3/4”

Order code: LQ-111
Price: € 53,00

Put in shopping cart

FXTRA

The FXtra is a compact gel holder that facilitates a quick installation and removal of colored gels. Eight Rosco gels are included in the integrated storage pouch: CTO, 1/2 CTO, 1/4 CTO, Plus Green, 1/2 Plus Green, Sky Blue, Canary Yellow, Fire Red.

FXtra is sized to use with most popular flashes and the gel pocket accommodates both Rosco and Lee gel samples. Any LumiQuest accessory (and many other brands) can be attached while FXtra is in place allowing you to colorize the light while using a variety of light modifiers.

Application: To colorize the light easily with or without other LumiQuest accessories in place.

Approximate Light Loss: Varies with gel

Dimensions: 6” x 3”

Order code: LQ-121
Price: On request

Put in shopping cart

SOFT SCREEN

The SOFT SCREEN is a flash diffuser designed to take the edge off the harsh light emitted from digital (or film) SLR pop-up flashes. It installs into the hot shoe and has optional Velcro for more secure attachment.

Application: To soften harsh shadows and reduce red-eye.

Dimension: Folds flat to 3 7/8” x 4 1/2”

Order code: LQ-051
Price: € 19,00

Put in shopping cart

SNOOT

The SNOOT isolates the light to a very specific area. Automatic operation may be affected as illuminated area is limited; bracketing and/or testing is recommended.

Application: To illuminate a specific area of a scene with little or no effect on the surrounding area.

Dimensions: Folds flat to 5 3/4” x 7 1/4”

Order code: LQ-114
Price: € 41,00

Put in shopping cart

MIDI BOUNCER

The MIDI BOUNCER, designed for use with large professional flashes such as Metz, Sunpak, etc.,
redirects the light at a 90º angle from the flash to soften the quality of light and distribute it over a wider area. Horizontal coverage is approximately 80°. While no exposure compensation is necessary when using the automatic features of the flash, operating distances are somewhat reduced.

Application: To soften flash light quality with minimal light loss. To be used with slaves or alone where low ceilings are not available, or where more direct but soft fill light is desired.

Approximate Light Loss: 1 1/3 stops

Dimensions: Folds flat to 5 1/2” x 8 3/4”

Order code: LQ-110
Price: € 41,00

Put in shopping cart

SOFTBOX

The SOFTBOX diffuses the light with the flash in the direct flash position. The light is softened and more evenly distributed as it passes through a center-weighted frosted diffuser. The unique design does not block either exposure sensors or auto focus assist beams on most flashes.

Application: To achieve a softer look with reduced shadow definition. For use on an individual flash or to softly illuminate the background in a multiple flash set up.

Approximate Light Loss: 1 1/4 stops

Dimensions: Folds flat to 5” x 7”

Order code: LQ 107
Price: € 53,00

Put in shopping cart

SOFTBOX II

The SOFTBOX II is designed exclusively for use on bare bulb flashes such as Lumedyne, Quantum Q Flash and Sunpak 120J.

Application: To soften shadows and eliminate unpleasant red eye.

Approximate Light Loss: 1 1/4 stops

Dimensions: Folds flat to 6 1/4” x 7 3/4”

Order code: LQ-109
Price: € 53,00

Put in shopping cart

SOFTBOX III

The SOFTBOX III is roughly twice the size of our original SoftBox, thereby producing considerably softer shadows. It fits conventional flashes (Nikon, Canon, Sunpak, Vivitar, etc.). Like the original SoftBox (LQ-107), the SoftBox III is center weighted but it will block autofocus assist and interfere with auto exposure UNLESS you are using TTL metering.

Application: For use when shadow/softness is more important than portability.

Approximate Light Loss: 2 stops

Dimensions: Folds flat to 8” x 9”

Order code: LQ-119
Price: On request

Put in shopping cart

MINI SOFTBOX

The MINI SOFTBOX diffuses light with the flash in the direct flash position. Unobtrusive and low profile, it is ideal for press and other fast-moving situations.

Application: To soften shadows and eliminate unpleasant red eye.

Approximate Light Loss: 1 stop

Dimensions: Folds flat to 3 3/8” x 4 3/4”

Order code: LQ-108
Price: On request

Put in shopping cart

ULTRA BOUNCE

The ULTRA BOUNCE distributes the light over approximately 180 degrees so that it can bounce off walls and ceilings to evenly illuminate a scene. The opaque sensor screen keeps the light from affecting the automatic sensor on most flash units.

Application: Accessories such as our UltraBounce are not shadow softening devices themselves since they are not materially larger than the flash itself. These accessories are actually light distribution devices. By spreading the light over 180º it can be bounced back into the frame by nearby walls and ceilings.

Approximate Light Loss: Variable depending on ceiling/wall distances.

Dimensions: Folds flat to 2 1/4” x 3 1/4”

Order code: LQ-116
Price: € 28,00

Put in shopping cart

CINCH STRAP

The CINCH STRAP enables photographers to attach LumiQuest accessories without installing self adhesive loop to their flash.

In addition, wrap around velcro attaches LumiQuest accessories for a more secure attachment. This is particularly useful with the Big Bounce and our larger SoftBoxes.

Order code: LQ-117
Price: € 16,50

Put in shopping cart

PROMAX SYSTEM

The PROMAX SYSTEM is a six piece photographic flash light modification accessory kit.

The system includes an 80-20 ceiling bounce device complete with interchangeable white, gold and silver inserts as well as a removable frosted diffusion screen. The ProMax System enables the photographer to deal with a variety of different lighting situations on location, maximizing the potential of the shoe and handle mount flash unit.

Approximate Light Loss: For 80-20 – variable depending on ceiling height.

With Inserts:

  • White: 1 1/3 stops
  • Gold Metallic: 1 stop
  • Silver Metallic: 2/3 stop

Frosted Diffusion Screen with Inserts:

  • White: 2 1/3 stops
  • Gold Metallic: 2 stops
  • Silver Metallic: 1 2/3 stops

Order code: LQ-105
Price: € 86,00

Put in shopping cart

PROMAX ACCESSORY KIT

The PROMAX ACCESSORY KIT adds flexibility to your LumiQuest 80-20 and/or Pocket Bouncer. The accessory kit includes a white insert, gold and silver metallic inserts, and a frosted diffusion screen.

White Insert: To be used with a LumiQuest 80-20 where low ceilings are not available, or in situations where more direct but soft fill light is desired.

Approximate Light Loss: 1 1/3 stops

Gold Metallic Insert: Adds warm tone to the scene

Approximate Light Loss: 1 stop

Silver Metallic Insert: Adds a specular look to highlights

Approximate Light Loss: 2/3 stop

Frosted Diffusion Screen: Ideal for close-ups
and portraits

Approximate Light Loss:
With White Insert: 2 1/3 stops
With Gold Insert: 2 stops
With Silver Insert: 1 2/3 stops

Order code: LQ-106
Price: € 54,00

Put in shopping cart